{"product_id":"stator-ignition-source-coil-kx125-250-yz125-rm00034-refer-to-fitments","title":"Stator Ignition Source Coil KX125\/250 YZ125 (RM00034) Refer to Fitments","description":"\u003cp\u003eBrand new ignition source coil.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOften unavailable from the OEM manufacturer.\u003c\/li\u003e \u003cli\u003eHighest-grade lamination materials.\u003c\/li\u003e \u003cli\u003eHighest-grade copper windings resistant to 200 degrees Celsius.\u003c\/li\u003e \u003cli\u003eWorks with all other OEM parts.\u003c\/li\u003e \u003cli\u003eAll products shipped are tested.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBig Coil: Between each leg = 323 ohms+\/-20%\u003c\/li\u003e \u003cli\u003eSmall Coil: Between each leg = 20 ohms+\/-20%\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cem\u003eKawas aki I 1992-1997 KX125 1992-97 KX250\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTake the ignition cover off.\u003c\/li\u003e \u003cli\u003eTake note of the wire colours of the original stator wires and disconnect them from the wiring loom.\u003c\/li\u003e \u003cli\u003eRemove the flywheel using a proper puller tool.\u003c\/li\u003e \u003cli\u003eRemove the baseplate with the original stator.\u003c\/li\u003e \u003cli\u003eRemove the screws that secure the ignition coils and take the coils off.\u003c\/li\u003e \u003cli\u003eCut the original wires close to the original coils. Take a good look at how the wires are connected to the coil.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eLarge coil connects to the Black\/Red and the Red wire.\u003c\/p\u003e \u003cp\u003eSmall coil connects over to the large coils Red wire and the other side to the White wire.\u003c\/p\u003e \u003cp\u003eConnect the wires on the same side of the coils as the original setup.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConnect the old wires up to the new coils. Put the wires in exactly the same place as on the original. Make sure you have good connections here\u003c\/li\u003e \u003cli\u003eMount the coils onto the baseplate fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY!\u003c\/li\u003e \u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eRefit the stator baseplate. Ensure the wires CANNOT TOUCH THE FLYWHEEL! (especially on the inside of.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eYamaha YZ125 1992\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTake the ignition cover off.\u003c\/li\u003e \u003cli\u003eTake note of the wire colours of the original stator wires and disconnect them from the wiring loom.\u003c\/li\u003e \u003cli\u003eRemove the flywheel using a proper puller tool.\u003c\/li\u003e \u003cli\u003eRemove the baseplate with the original stator.\u003c\/li\u003e \u003cli\u003eRemove the screws that secure the ignition coils and take the coils off.\u003c\/li\u003e \u003cli\u003eCut the original wires close to the original coils. Take a good look at how the wires are connected to the coil.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCONNECTIONS:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eLarge coil connects to the Brown wire connect the other side up to the Red wire.\u003c\/p\u003e \u003cp\u003eSmall coil connects to the Black wire (= ground) connect the other side up to the White wire.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConnect the old wires up to the new coils. Put the wires in exactly the same place as on the original.\u003c\/li\u003e \u003cli\u003eMake sure you have good connections here.\u003c\/li\u003e \u003cli\u003eMount the coils onto the baseplate fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY!.\u003c\/li\u003e \u003cli\u003eRefit the stator baseplate. Ensure the wires CANNOT TOUCH THE FLYWHEEL! (especially on the inside of the flywheel).\u003c\/li\u003e \u003cli\u003eRefit the flywheel. Tighten the bolt to the specified torque.\u003c\/li\u003e \u003cli\u003eConnect the wires to the wiring loom on the bike. Refit the ignition cover.\u003c\/li\u003e \u003cli\u003eConnect the wires to the wiring loom on the bike.\u003c\/li\u003e \u003cli\u003eFilll the ignition cover.\u003c\/li\u003e \u003c\/ul\u003e","brand":"RMSTATOR","offers":[{"title":"Default Title","offer_id":44186597457964,"sku":"RMS00034","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/2722\/6156\/files\/RMS00034.jpg?v=1742114526","url":"https:\/\/buzzbikes.com.au\/products\/stator-ignition-source-coil-kx125-250-yz125-rm00034-refer-to-fitments","provider":"Buzz Bikes","version":"1.0","type":"link"}